No.63,Xiyi Road,New District,Wuxi,Jiangsu Province
Contact:Mr.Hua Guoxing
Mobile:086 13906181882
Tel:086-0510-83219970
086-0510-83219971
Fax:86-0510-83210909
Email:hy@chinawxhypump.com
WG-2’’ BADGER
Rotary Cleaning for Small Pipes with Elbows
The 2” Badger is a self-rotating tool designed for cleaning 2– in.
(51–102 mm) pipes with bends and long radius elbows such as
U-Tubes and process lines. The latest design includes a spring-loaded
pin that ratchets the head to machined edges on the shaft. Therefore, the
head can only be removed with a special head removal tool and not while
in operation.
FEATURES:
·The only self-rotary tool on the market that can navigate 2 in.
(50 mm) pipes with bends
·The only tool in the industry with head locking technology for
increased safety
·Multiple jetting options allow the tool to be optimized for a
variety of pump pressures and flows. Unplug, polish, or run
longer lines based on jetting
Model | Pressure Range | Flow Range | Inlet Connection | Weight | Max Temperature |
WG2-100 | 2-15k psi 140-1000bar | 3-20gpm 11-76l/m | 1/4 NPT or 1/4 BSPP | 0.45lb 0.20kg | 250°F 120°C |
WG2-150 | 12-22k psi 830-1500bar | 3-15gpm 11-57l/m | 9/16MP or M24 | 0.45lb 0.20kg | 250°F 120°C |
NOZZLES AND PLUGS
The 2” Badger can be jetted in different
configurations depending on the
application. The image below shows
the standard nozzle/plug configuration
for the 2” Badger tool.
WG4’’ BADGER
Rotary Cleaning for Medium Pipes with Elbows
The 4” Badger self-rotary tool makes cleaning pipes with elbows easy,navigating 4 in. (102 mm) bends with controlled rotation which is important for efficiently cleaning larger pipes. The operator can choose
between two rotation speeds by selecting fast or slow viscous fluid.
FEATURES:
• Different jetting configurations allow for more or less pull and forward
hitting power
• Navigates elbows as small as 4 in. (102 mm)
• Self-rotary, speed control provides complete internal coverage,
while speed control provides optimum jet delivery
• Two speeds to choose from to maximize cleaning by choosing slower
speeds for hard to clean or plugged pipes, and faster speeds for polishing
easy to clean pipes with a single tool
• Multiple jetting options optimize the tool for a variety of pumps pressures
and flows. Unplug, polish, or run longer lines based on jetting
• Designed to pair with the AutoBox ABX-500 hose handling system for
hands-free pipe cleaning
Model | Pressure Range | Flow Range | Inlet Connection | Rotating Speed | Weight |
WG4-150 | 830-1500bar | 45-95 l/m | 3/4 M Male | 75-250rpm | 1.4kg |
WG4-280 | 2800bar | 17-45.5 l/m | 3/8 HP Female | 100-400rpm | 1.8kg |
NOZZLES AND PLUGS
The 4” Badger can be jetted in different configurations
depending on the application. The image below
shows the standard nozzle/plug configuration for the
4” Badger tool.
WG6’’ BADGER
Rotary Cleaning for Large Pipes with Elbows
The 6” Badger self-rotary tool features adjustable speed control which allows operators to meet the demands of the task at hand –slower rotational speeds for tough deposits and plugs, faster rotation for easier jobs or polishing.
FEATURES:
• Only rotary pipe cleaning tool on the market with adjustable speed control
for fine-tuning to specific requirements
• Different jetting configurations allow for more or less pull and forward
hitting power
• Navigates elbows as small as 6 in. (152 mm)
• Speed controlled rotary tools provide complete internal coverage, while
speed control provides optimum jet delivery
• Maximize cleaning by choosing slower speeds for hard to clean or
plugged pipes and faster speeds for polishing easy to clean pipes with a
single tool
• Optimize the tool for a variety of pumps pressures and flows with multiple
jetting options
Model | Pressure Range | Flow Range | Rotating Speed | Inlet Connection | Weight | Max Temperature |
WG6-150 | 840-1500bar | 53-163 l/m | 50-300 rpm(Adjustable) | 9/16 MP, M24 | 3.6kg | 120°C |
WG6-280 | 140-1000bar | 57-208 l/m | 50-300 rpm(Adjustable) | 1/2 NPT | 3.6kg | 120°C |
NOZZLES AND PLUGS
The 6” Badger can be jetted in different configurations
depending on the application. The image below shows
the standard nozzle/plug configuration for the 6”
Badger tool.