No.63,Xiyi Road,New District,Wuxi,Jiangsu Province
Contact:Mr.Hua Guoxing
Mobile:086 13906181882
Tel:086-0510-83219970
086-0510-83219971
Fax:86-0510-83210909
Email:hy@chinawxhypump.com
WHY13200 high pressure pumps are built to operate at the continuous maximum duty stated in the performance parameters. Just compare the crankshaft speed, average plunger speed, plunger diameter and power rating.
Stationary unit with electric motor Length: 2200 mm Width: 1600 mm Height: 1600 mm Weight: 1800 kg |
with dieselengine Length: 2800 mm Weight: 2000 mm Height: 2000 mm Weight: 2800 kg |
Features
² Power ratings up to 132kw
² Horizontal 3 cylinder design
² Wide variety of complementary ancillaries
Quality and reliability
² Stainless steel pump head free of alternating stress
² Spring preloaded high pressure sealing make it longer life
² Solid solid ceramic plunger to ensure high strength and stable operation
² An integrated lubricating oil and piston cooling system to improve the service life.
² Built-in double gear reducer to make transmission balance higher efficiency
² Special design of the crankcase magnetic filter
² Crankcase forced lubrication system
² An integrated ball type liquid inlet valve design, greatly improving the efficiency of fluid mechanics.
² Computational fluid mechanics design in dynamic load to ensure the highest reliability under max duty working conditions.
The crankshaft is made of a high strength forging process and is specially treated
Main dimensions without accessories such as suction line, pressure regulator etc. Detailed dimensional drawings and weights available on request.
Standard outlet joint size:M22
Standard inlet joint size:1”
Model | Plunger | Flow | Required power rate (kw) | D | r.p.m. | ||||
55kw | 75kw | 90kw | 110kw | 132kw | n1 | n2 | |||
Diameter(mm) | (l/min) | Operating pressure (bar) | |||||||
WHY13216 | 16 | 26 | 1100 | 1500 | 1800 | 2200 | 2700 | 1500 | 470 |
WHY13218 | 18 | 32 | 850 | 1150 | 1400 | 1700 | 2100 | 1500 | 470 |
WHY13220 | 20 | 40 | 700 | 940 | 1120 | 1400 | 1700 | 1500 | 470 |
WHY13222 | 22 | 48 | 570 | 780 | 930 | 1150 | 1400 | 1500 | 470 |
WHY13224 | 24 | 57 | 480 | 650 | 780 | 960 | 1200 | 1500 | 470 |
WHY13226 | 26 | 67 | 400 | 550 | 670 | 820 | 1020 | 1500 | 470 |
WHY13228 | 28 | 78 | 350 | 480 | 580 | 700 | 880 | 1500 | 470 |
WHY13230 | 30 | 90 | 300 | 420 | 500 | 600 | 770 | 1500 | 470 |
WHY13232 | 32 | 102 | 260 | 370 | 440 | 540 | 670 | 1500 | 470 |
WHY13234 | 34 | 115 | 230 | 320 | 390 | 480 | 600 | 1500 | 470 |
WHY13236 | 36 | 129 | 210 | 290 | 350 | 430 | 530 | 1500 | 470 |
WHY13240 | 40 | 159 | 170 | 230 | 280 | 350 | 430 | 1500 | 470 |
WHY13245 | 45 | 202 | 130 | 180 | 220 | 270 | 340 | 1500 | 470 |
WHY13250 | 50 | 249 | 110 | 150 | 180 | 220 | 280 | 1500 | 470 |
WHY13255 | 55 | 301 | 90 | 120 | 150 | 180 | 230 | 1500 | 470 |
D=Piston/Plunger dia. [mm] WHY13216~WHY13218:A type Fluid End, spring preload dynamic seal, SS fluid end
n1=Motor/Engine r.p.m WHY13218~WHY13545:B type Fluid End, spring preload packing seal, alloy steel & SS fluid end
n2=Crankshaft r.p.m WHY13236~WHY13255:C type Fluid End, spring preload packing seal, alloy steel fluid end
N2 Plunger speed:1.08m/s Conversion table:Rating 1kW=1.34HP
Rod force:54KN Op.pressure 1bar=14.5psi=0.1Mpa
Stroke:90mm Conversion efficiency of WHY high pressure pump can up to 90%~96%